Most of the home networks make use of routers in order to connect their devices to the internet and one can instantly gain access to the router by using the IP address. Different kinds of routers make use of different IP addresses and the IP address 192.168.1.254 is one such address attributed to various broadband modems or routers. It is a default IP address used by home routers with private access. Some of the common routers or modems that make use of the IP address 192.168.1.254 are 2Wire, Linksys, Aztech, TP-Link, Billion, Motorola, ADSL, and others.
Whenever people buy a new router or modem, it comes with default login id credentials. Without them, it is truly difficult to access the Wi-Fi connection on any of your devices. These particular login credentials also help the users to protect their internet from irrelevant connections. In order to access the internet via a router, you must have to type the particular IP address in your browser’s address bar, and then, type in the default username and password in your router admin panel.
Unfortunately, if you forget the router login details then, it becomes quite challenging for users to find it out. However, you don’t have to worry at all. We are here to help you in resolving the router login issues with much ease. In this post, we have provided a detailed guide on how to login 192.168.1.254 IP Address, the procedure to reset and change the router username, password, and the Router IP address. Have a look!
HOW TO LOGIN to 192.168.1.254 IP ADDRESS?
Most of the routers usually come with default username and password which you can use to login to the admin dashboard via 192.168.1.254 IP address. You need to follow few simple steps to access the login page of the router.
- Connect the router to your PC wirelessly or with wired LAN cable to develop a connection
- Open the web browser on your computer and enter http://192.168.1.254/ in the address bar.
- Hit ‘ENTER’ and then Login page of the router will open.
- Type in the default login details such as the username and password are written at the back of the router.
The default username and password for most routers are:
- Now you will be landed on the admin dashboard of the router and there you can access the features and make necessary changes.
Every router comes with different IP address and you need to know the right IP address of your router to successful login and access your router.
What is my Router IP Address?
Setting up a new router or to configure your network requires a Router IP Address. If you don’t know your router’s IP address, you can locate it using a command prompt:
- Press Windows-R to open the Command Prompt.
- Enter ipconfig to display a list of all your computer’s connections.
- Find Default Gateway under the Local Area Connection section. This is your router’s IP address.
HOW TO RESET AND CHANGE THE ROUTER IP ADDRESS?
If you face any issues in accessing the internet using the default IP address then, there is a possibility to reset and change the router IP address at any time using its administrative interface.
Entering http://192.168.1.254 into a web browser address bar provides access to your router’s administrative console, where you can change the router’s IP address as well as configure several other options, including the IP addresses they assign to devices on the network. Go to the LAN settings and alter the IP address depending on your choice. Go to the DHCP Settings and type the new IP address in the corresponding area. In most cases, the default IP addresses such as 192.168.0.1, 10.0.0.0.1 or 192.168.2.1 can be used.
HOW TO RESET AND CHANGE THE ROUTER USERNAME AND PASSWORD?
If you are unable to access the router’s setup page or to make your router secure, you need to change the default username and password which is usually very easy to crack. So, what you need to do is follow the same above steps to access the 192.168.1.254 Login page. Enter the default username and password and you will be landed on the admin dashboard from where you can change the username and password.
Go to Advanced settings > Router Admin > Change Password > Enter the old password and New Password and save.
Be sure to set a secure username/password combination and enable WPA2 and PSK for the Wi-Fi security. Further, you should use an updated encrypted hard password for WPA2 and PSK to make the Wi-Fi safer.
To know your router’s default login credentials, you can also check the ‘User Manual’ that comes with your router. The user manual usually contains all the information that you are looking for, including the IP address, username, and password.
Reset your Router Settings:
Suppose that you have changed the login information of your router at some point and you have forgotten the information. So at this point, the only thing that you can do is reset the router and restore everything to the factory defaults along with the default username and password.
In order to do so, you need to press and hold the “Reset” button for about 30 seconds. Assure that the power LED on the router is blinking soon after hitting the Reset button. The time for the Reset method relies on the model of the router. Once you are done with the reset process, you need to connect the router to your PC again and turn the router ON.
To Reset router from web page, the user needs to drive to the setup page, then go to the Administration tab >> Factory Defaults that appears on the screen. In the Factory Defaults section, tap the button that reads ‘Restore Factory Defaults’. After resetting the router to the default settings then, you need to reconfigure the device depending on the internet connection.
192.168.1.254 IP Address’ Default Usernames and Passwords List:
All routers are shipped with default usernames and passwords. The username and password combinations are fairly standard for each manufacturer. The most common are:
|2WIRE||(none)||“wireless” or (none)|
|AZTECH||“admin”, “user”, or (none)||“admin”, “user”, “password”, or (none)|
|Billion||“admin”||“admin” or “password”|
|MOTOROLA||“router”, “admin” or (none)||“password”, “motorola”, “admin”, “router”, or (none)|
|NETOPIA||“netopia” or “admin”||“netopia”, “1234”, “admin”, “password” or (none)|
|Thomson||(none)||“admin” or “password”|
|TP-Link||“admin”||“admin”, “password” or “ttnet”|
|Westell||“admin” or (none)||“password”, “admin”, or (none)|
So these are the processes that you can follow when you need to reset the username and password of your 192.168.1.254 router and access the 192.168.1.254 login page. If you have any more queries then leave a comment below.